Co-ordSport Performance Parts – Technical Blog

Many people are having problems with the headlight washer jets on the Mk2 Focus RS falling out of there place. This only seems to occur on early Focus RS’s (’09Plates). This is because the early Mk2 Focus RS’s headlight washer covers do not have the 3rd (Middle) hole either side of the extension for the retaining wire/brace to clip into. The later versions have the retainer, you can upgrade/replace yours, with the new spec. Parts available from us as below.

Right hand side Focus RS Mk2 Headlight washer jet covers are available to buy online at -www.partbox.com

Left hand side Focus RS Mk2 Headlight Washer Jet covers are available to buy online at -www.partbox.com

Recent pictures of a satisfied owner’s Honda S2000 with the AP Racing Big Brake Kit and RAYS CE28N Wheels supplied by Co-ordSport:

1875 +50 Front (with 225/40R18 tyre)

1885 +47 Rear  (with 225/40R18 tyre)

Images are above.

Buy AP Racing Big Brake kit Online : Honda S2000 AP Racing Big Brake Kit

Buy RAYS CE28N Wheels Online : RAYS CE28N Wheels

The Nissan Navara is a little different to many other 4WD’s – the wheel fitment is more like regular cars, with a PCD of 6 x 114.3mm and a hub center bore of 66.1mm.

Our RAYS dealer in France ‘ Urban Racing ‘ really wanted to fit RAYS wheels to his everyday driver – his Nissan Navara. The wheel he naturally wanted to use was from the RAYS range, the Gram Lights 57 JX6 – but that is only available in a PCD of 6×139.7mm, with a center bore of 112mm.

A Quick discussion with our friends at ‘ TT Tools ‘ meant they machined up some precision spacer/adapters and Urban’s owner, Philippe, was able to equip his Nissan Navara with RAYS wheels – Perhaps the first Navara in Europe, or even the world, with RAYS Gram Lights fitted ?

The above images show the car with the wheels fitted, the wheels and the adpater spacers.

Available in 16″ And 18″.

Available to Buy online : RAYS Gram Lights 57JX6 Alloy Wheels ( www.part-box.com )

Also Available Here : RAYS 57JX6 Wheels ( Gram Lights ) ( www.rays-msc.com )

Swift Sport 1.9 Track Car

Our track car has it’s 85.0mm bore 1884cc engine built and now installed in the car, along with this with Schrick cams, Piper manifold and exhaust and Greddy e-manage piggy back ECU. We’re just waiting for the BRICO body shop to complete the installation of the rollcage, seats and harnesses, plus repairs to the body work/paint work, more news as soon as we get the car running and on the rolling road.

Swift Sport 1.6 Road Car

Our road car Sport has had a series of different manifolds fitted, since we installed it’s Dastek Unichip-Q Mappable ECU. The latest rolling figures from Aldon Automotive shown below. The most successful and final package is currently:

• Greddy Trust Stainless manifold
  
• Sports Cats & Centre pipe
• HKS Duplex back box with slash-cut tails
• Monster Carbon ducted air intake (similar results to HKS Racing Suction Kit, but with a more sophisticated look!)

Read the rest of this entry »

Team SATS Cosworth headed off to the Norfolk Arena, in Kings Lynn, for the second round of the Maxxis Tyres BDC which was held last Saturday, 21^st May.

The team were looking to repeat their success at round one, which seen them take 1^st place. However, just after this, the team had a problem when they realised that the track at Norfolk wasn’t quite suited to the Supra’s setup. After several meetings and phone calls, the team decided that it would be best to arrive at the track with the same setup, and make a decision on how to adjust the car then.

Read the rest of this entry »